Electronic Metalform Industries Limited

Racks & Accessories

As well as custom sheet metal fabricated products Electronic Metalform manufactures a line of 19” standard (44 RU) modular equipment racks and accessories. Noted for being a solid well constructed rack, wiring technicians find them an ease to work with. They are simple, well put together racks offered at a competitive price.

Please note that EMF manufactures custom racks and accessories to customer specs and requirements. Contact us for a quote or further information.

We compliment our line of racks with numerous accessories such as various door types, tapped mounting rails, blank panels, shelves, plugmolds, tie bars and caster bases. See a full parts list with part numbers and a description of our standard line items below. Contact EMF for pricing.

19” Modular Equipment Racks and Accessories

Parts List	Part #	Description
RACKS	EM1925-44 EM1930-44	STD. RACK 25 – ½” DEEP x 82 – ½ HIGH STD. RACK 30” DEEP x 82 – ½ HIGH
DOORS	DR1944-1A DR1944-1C DR1944VC-LH DR1944VC-RH	DOOR w LOCKING “L” HANDLE DOOR w LOCKING FLUSH HANDLE DOOR LOUVERED w LOCKING FLUSH HANDLE ON LEFT DOOR LOUVERED w LOCKING FLUSH HANDLE ON RIGHT
SIDE PANELS	SP2544 SP3044	STANDARD SIDE PANEL FOR 25 – ½” DEEP RACK STANDARD SIDE PANEL FOR 30” DEEP RACK
MTG. ANGLES	MA44-4A	EIA UNIVERASAL SPACING TAPPED 10 – 32
TOP COVERS	TC1925-3 TC1925-3A TC1925-3B TC1930-3 TC1930-3A TC1930-3B	PERFORATED TOP SOLID TOP SOLID w 10” x 10” CUTOUT IN CENTRE PERFORATED TOP SOLID TOP SOLID w 10” x 10” CUTOUT IN CENTRE
BLANK PANELS	BPA19-01 BPA19-02 BPA19-03 BPA19-04 BPA19-05 BPA19-06 BPA19-07	1 RACK UNIT SPACE 1 – ¾” HIGH 2 RACK UNIT SPACE 3 – ½” HIGH 3 RACK UNIT SPACE 5 – ¼” HIGH 4 RACK UNIT SPACE 7.00” HIGH 5 RACK UNIT SPACE 8 – ¾” HIGH 6 RACK UNIT SPACE 10 – ½” HIGH 7 RACK UNIT SPACE 12 – ¼” HIGH
SHELVES	SH1918-2 SF1912-1	2 RACK UNITS HIGH (3-1/2”) x 18” DEEP 1 RACK UNIT HIGH (1.75”) x 12” DEEP
PLUGMOLDS	PM44-5 PM44-5I	12 OUTLETS ON 6” CENTERS 12 OUTLETS ON 6” CENTERS w ISOL. GROUND
A.C. OUTLET	AC6 AC6-I	INSTALLED INSIDE RACK FRAME INSTALLED INSIDE RACK FRAME w ISOL. GROUND
GROUND BAR	GB44	COPPER GROUNDING BAR 3/16” x ¾”
LACING BAR	LB44	ALUMINUM CABLE TIE BAR
CASTER BASE	CB1925-11 CB1930-11	1000 lbs. CAPACITY FOR 25 – ½” DEEP RACK 1000 lbs. CAPACITY FOR 30” DEEP RACK

General Notes:
1) Custom racks & accessories, available for quotation upon request.
2) Standard colours include McCurdy blue or black textured baking enamel. Other colours and textures are available on request for a minimal charge.

Descriptions & Specifications

MATERIALS The entire rack is ruggedly formed of 12 Ga.(.104) cold rolled steel. The rack mounting angles are made of 11 Ga.(.120) steel. 18 Ga.(.050) cold rolled steel is used to make the doors and side panels as well as the perforated top. CONSTRUCTION Top and base are of a one piece construction and the entire assembly is completely welded. FINISH Standard cabinets include a dark blue baked enamel textured finish. Other colours are available for a minimal charge. GENERAL FEATURES The EM 1925-44 and EM 1930-44 Equipment Racks combine strength and versatility to meet a wide variety of installation requirements. The only difference in the two models is the front to rear dimension which is 25.5" for the EM 1925-44 and 30" for the EM 1930-44. The standard overall height of the racks is 82.25" with a 77.25" rack mounting space (44 rack units). Non standard racks can be ordered in any height to suit the customers requirement. All cabinets are fabricated to receive the following options accessories which can be ordered as required.
Mounting Angles		- 11 Ga.(.120) cold rolled steel-tapped #10-32 @ EIA universal 5/8"-5/8"-1/2"
Rear Door		- Can hinge left side or right side with locking "L" handle. Side Panels - "slip on" assembly
Top Cover		- solid or perforated
A.C. Receptacle		- installed on base front
Plug Mold		- installed (12 outlets @ 6.0" centers)
Cable Lacing Bar
Copper Ground Bar
Casters
The most outstanding features of these Racks are the results of design techniques that achieve flexibility in use:
-	Basic rack can be used where side panels or doors are not required.
-	Side panels and doors are easily installed or removed without the use of tools, providing the ultimate in installation ease and equipment accessibility.
-	Doors can be mounted front or rear, to open from left or right, and can be fitted with locks.
-	Mounting angles for flush or recess mounting at front or rear.
-	Two or more racks may be bolted together for perfectly-aligned multiple installations. Specially formed crossbraces ensure positive joints without distortion.